Photoshop: Create & Personalize Obama’s HOPE Poster Design

This tutorial is sponsored by Fotophire, the easiest and most user-friendly way to perfect your photos with just a few clicks. In just seconds, you can remove unwanted objects,
clone, easily crop and blur, remove & replace backgrounds, color correct and so much more. Fotophire has a massive library of over 200
effects that you can use to instantly make your photos look awesome and professional-looking. Until the middle of this month, Fotophire
is giving everyone a $50 discount off its price. Click the link in my video’s description! Hi. This is Marty from Blue Lightning TV. Politics aside, I’m going to show you how
to recreate the iconic “HOPE” poster of Barack Obama’s 2008 Presidential campaign
designed by Shepard Fairey using a different headshot. This is an update of a tutorial I did many
years ago on a much earlier version of Photoshop. Before we begin, I want to mention that I’ll
be moving a bit faster for more advanced users. I provided a Photoshop template that you can
download, so you can follow along. Its link in located in my video’s description or project files. It includes the original “Hope” poster design
and a separate layer of the framed border including the bottom shape that your text
will be placed onto. In addition, I included the link to the font,
“Nevis Bold”, which is relatively close to the original font, “Gotham” used in the poster. “Gotham” isn’t free, but “Nevis Bold” is. Open a photo of someone that you’d like to
use for this project. It can be color or black and white. The first step is to make a selection around
your subject. Since I want the selection to be as sharp
as possible, I drew paths with the Pen Tool and then converted it into a selection. I did an in-depth tutorial of the Pen Tool,
so if you’d like to watch it, I provided that link, as well. Once you made a selection around your subject,
click the Layer Mask icon to make a layer mask of the selection next to your subject. We’ll convert he entire layer into a Smart
Object, so we can modify it non-destructively. To do this, click the icon at the upper, right
and click “Convert to Smart Object”. With your Move Tool active, drag the subject
onto the tab of the poster template. Without releasing your mouse or pen, drag
it down and release. Drag the subject below the frame. We’ll make a new layer below the subject by
Ctrl-clicking or Cmd-clicking the New Layer icon. In this empty layer, we’ll create a two-tone,
gray background behind the subject. But first, go to View. If “Rulers” and “Snap” aren’t checked, just
click on them to make them active. Go to the ruler on the left and drag out a
guideline to the middle until it snaps in place. If you don’t see the guide line, press Ctrl
or Cmd + H. If your foreground and background colors aren’t black and white respectively,
press “D” on your keyboard. Click the foreground color to open the Color Picker. In the Brightness field, type in 50%. The, click OK or press Enter or Return. Open your “Rectangular Marquee Tool” and drag
a rectangular selection over the left side of the poster, making sure it snaps to the
middle guide line. Fill it with the foreground color by pressing
Alt or Option + Delete. Deselect it by pressing Ctrl or Cmd + D. Click the foreground color again and type in 25% for the Brightness. This time, drag your tool
over the right side of the poster, making sure it snaps to the guide line. Fill it with the foreground color and deselect it. Make the frame visible. Hide the guide line by pressing Ctrl or Cmd + H. Go to View and click “Snap” to deactivate it. Make your subject active. We want the top of our subject’s head to go
beyond the frame. If it’s not, just drag it up. If you want to enlarge your subject instead,
open your Transform Tool by pressing Ctrl or Cmd + T. Go to a corner and when you see
a diagonal, double-arrow, press and hold Alt or Option + Shift as you drag it out. Go to Filter, Blur and Surface Blur. Type in 10 for the Radius and the Threshold. Surface Blur essentially blurs an image while
preserving the edges. Go back to Filter and click “Filter Gallery”. Open the “Artistic” folder and click “Cutout”. Make the “Number of Levels”: 5 because the
poster has 5 colors. Make the “Edge Simplicity”: 5 and the “Edge Fidelity”: 1. To save some space in the Layers panel, click
the small arrow icon on the right of the layer, which collapses the effects. Click the Adjustment
layer icon and click “Channel Mixer”. Check “Monochrome”, which makes all the colors neutral gray. If your photo is already black and white,
it’s still a good step to use, since there may be a subtle color cast to it. Click the Adjustment layer icon again and
click “Posterize”. Make the Levels: 5. This sets the number of tonal levels (or brightness
values) for each channel in an image. Open your Magic Wand Tool. Make the Tolerance: 10, check “Anti-Alias” and make sure “Contiguous” is not checked. Click on the second lightest tone of your subject to make a selection of it. Go to Select and Save Selection. Click OK and deselect it. Click the Adjustment layer icon one more time and click “Gradient Map”. Click the gradient bar to open the Gradient Editor. Click the lower, left Stop. This will be our darkest color. Click the color box and in the hexadecimal
field, type in 00324D. Then, click OK or press Enter or Return. Click below the gradient bar to create a new Stop. For its Location, type in 25%. Click the color box and type in E01825. Make another Stop and for its location, type in 50%. For its color, type in 7498A4. Click the lower, right Stop and for its location,
type in 75%. For its color, type in FDE5A9. Click the right corner under the bar to add
another Stop. Notice this Stop’s location is 100% and it’s
color is the same as the one to its left. To save more space in the Layers panel, we’ll
place all of the Adjustment layers into a folder. To do this, Shift-click the bottom adjustment
layer to make all of them active and press Ctrl or Cmd + G. Name it “Adjustment layers”. We’ll make a new layer below the folder by
Ctrl-clicking or Cmd-clicking the New Layer icon. Click the foreground color and for Brightness, type in 50%. Fill the empty layer with the foreground color. The reason it’s not gray is because the gradient
map adjustment layer delineated the 50% gray tone into this specific blue color. Go to Filter and Filter Gallery. Close the “Artistic” folder and open the “Sketch” folder. Click “Halftone Pattern”. The Pattern Type is: “Line”, the Contrast
is: 50 and the Size is: 1. Open the Channels panel. If you don’t see it, go to Window and “Channels”. Ctrl-click or Cmd-click the the thumbnail
of “Alpha 1”, which makes a selection of it. Open back your Layers panel and click the
Layer mask icon to make a layer mask of the selection next to the line pattern. We’re ready to add the text. Make the frame layer active. Our text will be placed above it. Open your Horizontal Type Tool and pick “Nevis
Bold”, which is the font I provided the link to. I’ll make the size temporarily 225 points,
Sharp and Center Alignment. Click the color box and click the blue background
to pick up its color. Click on your document and type out your text. To adjust the space between two characters,
click between those characters and press and hold Alt or Option as you press the right
or left arrow key on your keyboard. To resize it, click your Move Tool and open
your Transform Tool. Position and resize it over the dark blue
panel. Then, press Enter or return. To center it, press Ctrl or Cmd + A to select the canvas and click the “Align Horizontal Centers” icon. Then, deselect it. Lastly, make a composite snapshot of the poster
by pressing Ctrl + Shift + Alt + E on Windows or Cmd + Shift + Option + E on a Mac. Doing this, results with a stronger line pattern
in the poster. Flattening the layers also creates the same effect. This is Marty from Blue Lightning TV. Thanks for watching!


Add a Comment

Your email address will not be published. Required fields are marked *